Group of red 31-inch ground spike sprinklers with 3/4-inch Rain Bird impact heads
A group of 31" Tall, heavy duty step spike wildfire sprinklers for wildfire structure protection in bush areas

31″ Tall 3/4″ Rain Bird Ground Spike Sprinkler with Base Plate

$349.00 CDN

Elevated 31-inch ground sprinkler with a commercial 3/4-inch Rain Bird impact head, 24-inch high-flow riser and heavy triangular step-in base. Projects up to a 50-foot radius at 50 PSI while using approximately 7–9 US GPM with the supplied nozzle setup.

7,850 sq. ft.calm-condition circular wet zone
Up to 50 ftcoverage radius
7–9 US GPMtypical flow at 50 PSI
3/16″ + 3/32″stock main and spreader nozzles

Uses the same commercial 3/4-inch Rain Bird impact head as the Water Winger. Both nozzles are changeable to tune flow and throw to the available water supply. Actual coverage varies with wind, nozzle selection, pressure, flow, hose losses and obstructions.

Category:

Description

Elevated high-flow ground coverage

Clear Tall Vegetation and Project Water Farther

A 31-inch step-in ground sprinkler that raises the commercial 3/4-inch Rain Bird impact head above grass, brush and low obstacles for broad perimeter wetting.

Water Winger-class impact head

Uses the same commercial 3/4-inch Rain Bird impact sprinkler head fitted to the Water Winger for long-throw rotating coverage.

Elevated 31-inch reach

The tall riser helps the water stream clear vegetation and nearby obstacles that can block a conventional low ground sprinkler.

Step-in triangular base

Press the heavy steel plate down with your foot to set three removable 7-inch spikes firmly into suitable ground.

Performance and construction

Overall height
Approximately 31 inches
Impact head
Commercial 3/4-inch brass Rain Bird
Planning performance
Up to a 50-foot radius at 50 PSI
Approximate wet zone
Up to 7,850 sq. ft. in calm conditions
Typical water demand
Approximately 7–9 US GPM with the supplied nozzle setup
Ground anchoring
Three removable 7-inch spikes on a heavy triangular steel plate
Riser
24-inch, 3/4-inch high-flow riser
Finish
Red powder coat with reflective visibility markings

Best suited for

  • Tall grass, brush and uneven perimeter areas
  • Locations where a lower sprinkler stream would be obstructed
  • Wide-area wildfire structure-protection layouts
  • Firm soil that can securely hold the three ground spikes
  • Portable systems requiring removable spikes for compact storage

Compare Optional Nozzles

Coverage note: Actual throw and wetting area vary with wind, nozzle selection, available pressure and flow, hose losses, terrain and obstructions. Confirm underground services before driving spikes into the ground.

Related products

  • Adjustable impact tripod sprinkler for wildfire structure protection

    Adjustable Impact Sprinkler on 26–48″ Tripod

    Wide-coverage impact sprinkler on an adjustable tripod for exterior fire protection and perimeter wetting.

    $149.00 CDN

  • Innovative Weighted Base wildfire structure protection ground sprinkler with 12" mast and rubber feet for decks and hard ground

    12″ Tall Weighted Base Sprinkler w/ 1/2″ Adjustable RainBird

    Stable, Canadian-built 12-inch weighted-base sprinkler for decks, docks, hard ground and other surfaces where a spike sprinkler is unsuitable. Adjustable 1/2-inch Rain Bird impact head, heavy steel base, rubber feet and brass garden-hose connection.

    $249.00 CDN

  • Heavy Duty 3/4" ground spike sprinkler, powder coated red with a 3/4" RainBird 30, full circle impact sprinkler

    Large 3/4″ RainBird Premium Ground Spike Sprinkler

    Heavy-duty ground spike sprinkler using the same commercial 3/4-inch Rain Bird impact head as the Water Winger. Up to a 50-foot radius (approximately 7,850 sq. ft.) with the supplied 3/16-inch main and 3/32-inch spreader nozzles at about 7–9 US GPM and 50 PSI. Changeable nozzles tune flow and throw to the available water supply.

    $189.00 CDN