$189.00 CDN
Heavy-duty ground spike sprinkler using the same commercial 3/4-inch Rain Bird impact head as the Water Winger. Up to a 50-foot radius (approximately 7,850 sq. ft.) with the supplied 3/16-inch main and 3/32-inch spreader nozzles at about 7–9 US GPM and 50 PSI. Changeable nozzles tune flow and throw to the available water supply.
High-flow ground protection
The same commercial 3/4-inch Rain Bird 30 impact head used on the Water Winger, mounted on a heavy-duty ground spike for fast perimeter wetting without roof deployment.
Up to a 50-foot radius provides an approximate 7,850-square-foot circular wet zone in calm conditions.
A solid rotating stream delivers long throw and dependable 360-degree ground coverage.
Position the heavy-duty spike where elevated or wide-area ground coverage is needed, then move it as the plan changes.
Nozzle tuning
Stock setup: 3/16-inch main nozzle and 3/32-inch spreader nozzle, typically requiring 7–9 US GPM at 50 PSI.
The main and spreader nozzles are changeable. Smaller or larger combinations can be selected to suit the available pressure and flow, just like the Water Winger. A spreader-port plug is included when lower water consumption or maximum throw is preferred.
Coverage is a planning estimate. Actual throw and wetting area vary with wind, nozzle selection, pressure, flow, hose length and diameter, elevation, terrain and obstructions.
Compact ground spike sprinkler using approximately 4 US GPM at 50 PSI with a throw of up to 39 feet for landscaping and wildfire structure-protection support.
$49.00 CDN
Custom sprinkler mounts and configurations built to suit unusual structures, mounting locations and water-system requirements.
Wide-coverage impact sprinkler on an adjustable tripod for exterior fire protection and perimeter wetting.
$149.00 CDN